Portable Patient Monitor

1. 7” color TFT display, high resolution: 640X480dpi;

2. Full Separated para boards: Main board, ECG board, NIBPboard, SpO2 board,

can guarantee the acccuracy and save after sell service;

3. Full touch-screen enables intuitive operation by clicking one the specific

parameters or the waveform in real time, standard configuration includes the

navigation knob;

4. Real time S-T segment analysis, and ARR analysis;

5. SpO2 Pitch Tone Variation and Drug Dose Calculation;

6. Parameter waveform and characters color selectable

7. Multi-display: Standard, Large font, Trend Coexis, OxyCRG dynamic

8. Standby mode for Energy saving and suspend monitoring;

9. 7-lead ECG waveforms display in phase;

10. Capture dynamic waveforms;

11. Built-in rechargeable lithium battery, and battery volume checking,

12. AC power checking

13. Efficient resistance to interference of defibrillator and HF knife;

14. SINNOR F-6 SpO2 technology, VS NELLCOR accuracy;

15. Networking capacity and TCP/IP networking platform enable abundant future

upgrade

16. Time delay switch-off function keep the monitor data restart monitor;

17. Complete and flexible mounting solution for transportation and in-patient

monitoring

18. SpO2 can work well In the condition of the low perfution of the patient

19. Can work in ICU, OR, ER

20. Permanent suspension of the Alarm with one button

Standard parameters: 5-lead ECG, SpO2,NIBP, TEMP,RESP,PR,HR.