Dental equipment best price dental x ray machine portable dental X-ray machine dental gun model handle X-ray machine

Product Description.

This model combines the advantages of similar products at home and abroad and eliminates the disadvantages of high frequency X-ray machines (high current intensity and high volume of waste X-rays). It uses a Toshiba 0.3 micro-focusing tube, which has a tube voltage frequency of 30 KHz and a tube current of 1 MA. The radiation range is a 24 degree angle and is located within a distance of 1.2 m in front. This is an innovative Chinese design called "Green X-Ray Machine".

TECHNICAL SPECIFICATIONS：

Reference of the Angles ：

Reference of the time of exposure：

Operation of the main unit.

On receipt, open the box and check that the product has not been damaged in transit.

Make sure that the accessories on the packing list are in the box.                         

Install the blue light tube on the front side of the ball head and tighten it.

Turn the power on and the indicator light will come on, during which time the digital tube will display the front setting time. The unit is now in standby mode.

Set the time (if not required, skip to the next step) Use the "SET", "+" and "-" buttons to reset the time as follows: Press SET, the upper indicator light will come on and the machine is now in time setting mode → then press "+" and "-" to set the desired time (the time range is 1-9 seconds); when the time has been adjusted and the indicator light is off, press SET again. The device is now in standby mode.

Place the dental film behind the tooth to be photographed and as close as possible (smooth side against the tooth).

Keep the ball head perpendicular to the projected position of the tooth; keep the ball head, tooth and dental film steadily perpendicular to each other.

Once positioned, use the ON/OFF button on the main unit to take the picture. (Note: Press lightly for 0.5 seconds to turn on.)

After the exposure tube, in case of emergency, press the start button again to stop shooting and return to standby. (No rays are output at this point, so the dental flakes can be used again).

Repeat step 6 to reset the shooting time. To repeat the shooting process, repeat steps 7 to 9.

When you have finished working, switch off the power and press the POWER button to ensure that the indicator light turns off.

Precautions

Make sure that the angle of the film, teeth and ball head are correctly aligned when taking the picture. Keep them steady until the last step of the shoot; make sure they are not changing in any position.

Remember to turn off the power when you have finished working.

If the machine does not work and the red light is on, charge the batteries.

After turning the power on, wait one minute before taking a picture, as this will allow the rays to provide a steady output.

When the voltage is incorrect, the unit will automatically switch to protection mode. If this happens, it will not be able to carry out normal shooting work.

When taking a picture, the on/off button stops the objection and the machine returns to the ready mode.

Use high quality dental tablets and developer to take clear pictures.

Handle gently during use to avoid damaging delicate parts.

When taking pictures, we usually set a time of 3-8 seconds, but the actual ray output time is 0.2-0.5 seconds.

If something happens that prevents the machine from taking pictures properly, please contact the seller to fix the problem rather than repairing the product yourself.

Keep dental films and solutions in a suitable place and use them within the shelf life.

Film should be developed at a temperature of 23-25 degrees Celsius to ensure image quality.

Other requirements follow the range of technical parameters.

Please read the instructions carefully before use.

Hot Tags: dental equipment best price dental x ray machine portable dental x-ray machine dental gun model handle x-ray machine, China, suppliers, manufacturers, factory, low price