(2) Push the trolley into the box body and clamp tightly;
(3) Loosen the locking handle, adjust the height of the carriage according to the position of the film, and reach the appropriate height of the photo box. After adjustment, lock the handle to take the film.
(4)After the filming is completed, pull out the film cart and take out the film box (or IP board, DR detector) from the film holder; push the film cart into the film box.
(4)After the filming is completed, pull out the film cart and take out the film box (or IP board, DR detector) from the film holder; push the film cart into the film box.
Structure and technical parameters
1. Structure
The device is composed of a column, a carriage, a film box (the film car can be pulled out in the box), and a balance device.
2. Main technical parameters
The maximum travel of the photo box is 1100mm;
The width of the card slot is suitable for boards with a thickness of < 20mm
Film box size: 5 "× 7" -17 "× 17";
Filter grid (optional):
Grid density: 40 lines / cm;
Grid ratio: 10: 1;Convergence distance: 180cm
The film box is on the right side, and the mobile base can be selected to become a mobile film holder
The device is composed of a column, a carriage, a film box (the film car can be pulled out in the box), and a balance device.
2. Main technical parameters
The maximum travel of the photo box is 1100mm;
The width of the card slot is suitable for boards with a thickness of < 20mm
Film box size: 5 "× 7" -17 "× 17";
Filter grid (optional):
Grid density: 40 lines / cm;
Grid ratio: 10: 1;Convergence distance: 180cm
The film box is on the right side, and the mobile base can be selected to become a mobile film holder
