What is the basic common sense of ECG?

Sep 24, 2021 Leave a message

What is the basic common sense of ECG?

01

A complete ECG wave is composed of P wave, QRS integrated wave, T wave, and U wave, reflecting the different stages of the heart beating process. The P wave is a small wave in front of the QRS wave, which is not easy to detect in some leads. QRS integrated wave is a wave group composed of Q wave, R wave, and S wave. It is the most obvious and easy to capture in ECG. T wave is a relatively wide wave after QRS wave. U wave is very small, even not found or not obvious. The heartbeat cycle refers to the time between the R wave and the R wave of two ECG waves, the reciprocal of which is the heart rate. The S-T segment refers to the segment from the end of the QRS wave to the beginning of the T wave.


Since the heart is a subject, its electrophysiological changes are transmitted to different locations on the body surface differently. In order to more comprehensively reflect the changes in the ECG, electrodes can be placed at different positions on the body surface to collect signals. After long-term clinical practice, the twelve-lead standard has been formed.


Standard lead:

                   Lead I: Left hand (LA or L) is +, right hand (RA or R) is-

                   Lead II: Left foot (LL or F) is +, right hand (RA or R) is-

                   Lead III: Left foot (LL or F) is +, left hand (LA or L) is-


Compression leads:

                   aVR: Right hand (RA or R) is +, the average current of left hand and left foot is-

                   aVL: The left hand (LA or L) is +, the average current of the right hand and the left foot                               is-

                   aVF: The left foot (LL or F) is +, the average current of the right hand and left foot is-


Unipolar chest conduction: Vi+, the central potential of the left foot and left hand and right hand. Vi-: V1~V6, different parts of the left chest along the heart.


The shape of the ECG measured by different leads is different, including the amplitude and direction of each wavelet, but they all have their own typical shapes. If the shape changes, it reflects a problem in a certain part of the heart activity.


ECG waveform introduction


The electrocardiogram consists of a series of different "waves". A typical ECG includes the following wavebands:

1. P wave (P wave): Reflects the changes in the potential and time of the electrical activation process of the left and right atria.

2. P-R interval (P-r interval): represents the time from the beginning of depolarization of the atria to the beginning of depolarization of the ventricles.

3. P-R segment (P-R segment): represents the time for atrial excitement to pass down the atrioventricular junction to the ventricle.

4. QRS Complex (QRS Complex): Reflects the changes in the potential and time of the left and right ventricular depolarization process. A typical QRS complex includes three connected waves. The first downward wave is the "Q" wave; the upward wave is the "R" wave; the downward wave after the R wave is the "S" wave.

5. S-T segment: The line segment from the end of the QRS complex to the beginning of the T wave, reflecting the changes in potential and time during early ventricular repolarization.

6. T wave (T wave) reflects the change of potential during late ventricular repolarization.

7. U wave: represents the "after potential" of myocardial activity.

8. Q-T interval: The time from the beginning of the QRS complex to the end of the T wave; it reflects the total time of ventricular depolarization and repolarization.


Software analysis content

1. ECG waveform QRS wave retrieval;

2. Calculate the heart rate through the R-R interval;

3. Analysis of arrhythmia;

4. ST segment analysis;

5. Heart rate variability analysis;