Linear array wireless probe
The wireless probe is a mini ultrasound scanner without a screen. We minimize the components of a traditional ultrasound into a small circuit board built into the probe, and showing image in smart phone/tablet through Wifi transferring. Rotate built-in screen probe is a wireless ultrasound probe add screen, image can both show in screen and tablet. Image transferring through internal wifi from probe, no need external Wifi signal.
Features
Workable with Tablet PC or Smart Phone (iOS, Android, Windows)
Advanced digital imaging technology, clear image
High cost-effective
Wireless connectivity without probe cable, easy to operate, working freely
Small and light , easy to carry
Applicable in hospital, emergency, clinic, outdoor and vet inspection
Intelligent terminal platform, powerful expansion functions on application, storage
Waterproof design, convenient for sterilization
Remote diagnostic convenience, capability and easy image transfer
Specifications
Scanning mode: Electronic array
Probe element: 96
Display mode: B, B/M, and Color, PW, PDI
Frequency: 7.5MHz/10.0MHz
Display Depth: 20/40/60/100mm
Scan angle and width: convex 50°, Phased array 80°, linear 40mm/80mm
Image Adjust: Gain, DYN, Focus, Depth, Harmonic, Denoise
Puncture assist function: the function of in-plane puncture guide line, out-of-plane puncture guide line, automatic blood vessel measurement, and the enhancement function of needle point development
Cineplay: auto and manual, frames can set as 100/200/500/1000
Measure: Length, Area, Angle, Obstetrics
Image frame rate: 18 frames/second
Battery working time: 3~5 hours
Charge: by wireless charger, 2 hours
Dimension: 156×60×20mm
Weight: 250g
● Wifi type: 802.11g/20MHz/5G/450Mbps
● Working system: Apple iOS and Android, Windows
Usage
1. For iPhone/iPad, please search “Wireless USG” in Appstore and download; For Android, please download from our website or copy from another smart phone/tablet.
2. Press the probe button to start up, then open the Wi-Fi of the smart phone/tablet, select the Wi-Fi from the probe, and enter the password as the probe serial number in lower case letters (e.g: SN: C1234567, the password is C1234567, don’t input “SN”).
3. Open the installed software and begin use. Reminder: A long button press is shutdown and a short press is freeze.
Hot Tags: wifi mini linear ultrasound scanner, China, suppliers, manufacturers, factory, low price
