In May 2000, the European Committee for Standardization (CEN) promulgated the European standard EN12469:2000 for biological safety cabinets, which formally replaced the standards for biological safety cabinets in EU member states such as German DIN 12950, British BS5726, and French NF X-44-201. Become a unified standard for biological safety cabinets in the European Union.
NSF49 has appeared in the 1970s and is recognized as the most complete standard in the field of biological safety cabinets. In 2002, ANSI/NSF49 was officially recognized by the American National Standard Institute (ANSI) and became the unified standard for biological safety cabinets in the United States.
NSF/ANSI49 and EN12469 are currently the most universal international certifications for biological safety cabinets in the world. These two standards have detailed instructions and requirements for safety cabinet performance classification and safety performance testing. Safety cabinet standards play an important role in regulating the safety cabinet market and protecting researchers.
Biosafety level P1
The substances used for experimental research are known, all the characteristics are clear and a variety of microbial substances that have been proven not to cause disease. The research is carried out on the open experimental platform through daily procedures. No special security protection measures are required. Operators only need to be trained in basic laboratory experiment procedures and are usually guided by scientific research personnel. In such an environment, the existence of a biological safety cabinet is not required.
Biosafety level P2
The substances used for experimental research are some known substances that are moderately dangerous and are related to some common human diseases. Operators must undergo operational training for relevant research and be instructed by professional scientific researchers. Prepare for pre-treatment of substances that are prone to contamination or that may cause contamination. Some operations that may involve or produce harmful biological substances should be carried out in a biological safety cabinet. Under these conditions, it is best to use a secondary biological safety cabinet.
Biosafety level P3
The substances used for experimental research are generally local or foreign substances that may cause people to be sick or life-threatening through respiratory infection. We need to protect all operators in the surrounding environment from being exposed to these potentially dangerous substances. Usually the use of two-level or three-level biological safety cabinets is necessary.
Biosafety level P4
The substances being tested are some very high-risk and deadly toxic substances, which can be transmitted through the air and there is no effective vaccine or treatment method to deal with them. Operators must be skilled in conducting research on such highly hazardous substances, and should be familiar with some related operations, protection facilities, laboratory design, etc. for the prevention of these highly hazardous substances. At the same time, it must be guided by researchers who are very experienced in this research field. The entry and exit of the laboratory should be strictly controlled. The laboratory must be built separately or in a separate room in a building separated from any other place, and a detailed operation manual about the research is required for reference. In such experimental research, a three-level biological safety cabinet is necessary.







