"The monitor can synchronously and continuously monitor the patient's ECG, blood pressure, respiration, body temperature, and other parameters, providing a good means for medical staff to grasp the patient's condition in a comprehensive, intuitive and timely manner. As the hospital gradually moves towards modernization, More monitors will enter the clinic and become the most commonly used medical equipment in the ward. Therefore, it is particularly important to maintain and maintain the monitor. Only when the maintenance and maintenance work is done can the monitor be in good working condition. ; At the same time, it can reduce the failure rate, extend the life of various sensors, components, and the whole machine, thereby reducing the treatment cost of the hospital. Summarizing the past work experience, the maintenance and maintenance of the monitor mainly include the following aspects:
Monitors usually work continuously for a long time, and it is easy to cause premature aging or even damage to internal parts due to high internal temperature. Therefore, we must clean the inside and outside of the machine to ensure that the machine has good heat dissipation and ventilation. In a few months, check the filter on the main unit and clean the dust on it. At the same time, check the surface of the operation panel and display. Use absolute alcohol to remove the dirt on it to avoid corrosion of these important parts. The casing of the machine must be disassembled every six months to a year to remove the dust inside the machine. While dust is removed, intuitive methods such as "seeing, smelling, and touching" can be used to inspect the modules and components in the machine. Sensor maintenance and maintenance: Due to the characteristics of the sensor itself and the part of the detected patient is often in motion, it is an easily damaged component and an important component that is more expensive. In order to extend their useful life and reduce treatment costs, we should do a good job of maintaining them. Communicate with medical staff frequently to guide them in the correct operation and maintenance of monitors and sensors. Do not fold or pull the sensor transmission wire; do not drop or touch the sensor probes such as blood oxygen saturation probes, temperature probes, and invasive blood pressure probes. For the non-invasive blood pressure cuff, when it is not tied to the patient, the host cannot perform measurement at this time, so as not to damage the inflated airbag. For monitors that need to be monitored for a long time and do not need to monitor blood oxygen saturation, you can turn off this function by adjusting the system configuration. If the machine has this setting or unplugs the interface that connects blood oxygen saturation to the host, the monitor Generally, each sensor is connected through an interface to extend the service life of this type of sensor. The sensor probe is easily stained with various dirt such as sweat and bloodstains. In order to avoid corrosion of the probe and affect the measurement, the probe should be cleaned regularly according to the method provided in the user manual.
If you are interested in this product, please feel free to contact us.
