1. Turn on the machine and turn on the main switch of the machine.
2. Check all monitoring functions to ensure that the monitor functions normally.
3. Prepare the supplies and bring them to the bedside of the patient.
4. Interpretation and communication.
5. Check the recorder.
6. System settings.
7. Setting menu.
8. Set information about fetus monitoring.
9. Print settings.
10. Choose the position of the fetal heart.
11. Fix the probe with elastic band.
12. The position of the straps should be correct and the elasticity should be moderate.
13. Start monitoring the fetal heart rate, fetal movement, and contractions.
14. After monitoring, turn off the switch, remove the probe one by one, and unplug the power supply.
