1. Always check whether the power cord of the sterilizer is well grounded to ensure personal safety.
2. The sterilizer should be placed in a ventilated and dry room, free of flammable and explosive materials.
3. The safety valve and bleed valve have been calibrated when they leave the factory, and the lead seals and screws on the valve must not be arbitrarily removed.
4. The stacking items shall not exceed 4/5 of the total volume, and safety has been taken.
5. Do not attach oil to the sealing ring to avoid damage to the rubber and cause air leakage.
6. It is strictly forbidden to sterilize chemicals that cause explosion or sudden pressure increase in contact with steam media.
7. When stacking items in the sterilizer, it is strictly forbidden to block the air outlets of the safety valve and the vent valve, and a space must be left to ensure that the air is unblocked, otherwise the safety valve and the vent valve cannot work because the vent is blocked, causing an accident.
8. When sterilizing the liquid, the liquid should be filled in a heat-resistant glass bottle with a volume of no more than 3/4, and the mouth of the bottle should be made of cotton yarn. Do not use perforated rubber or cork stoppers; after the sterilization, the steam is not allowed to be released immediately, and the remaining air can only be discharged after the pointer of the pressure gauge returns to zero.
9. Items of different types and different sterilization requirements, such as dressings and liquids, must not be sterilized together to avoid loss.
