Maintenance of biological safety cabinet
In order to ensure the safety of the biological safety cabinet, the safety cabinet should be maintained and maintained regularly:
1. The working area of the safety cabinet should be cleaned and disinfected before and after each use.
2. After the service life of the HEPA filter expires, it should be replaced by a professional who has received special training in biological safety cabinets.
3. The laboratory biosafety manual promulgated by WHO, the U.S. biosafety cabinet standard NSF49 and the China Food and Drug Administration biosafety cabinet standard YY0569 all require one of the following conditions, the biosafety cabinet should be tested for safety: installation is completed Before; annual routine inspection; when the safety cabinet is shifted; after replacing the HEPA filter and repairing internal parts.
Safety inspection includes the following aspects:
1. Inlet flow direction and wind speed detection: Inlet flow direction is detected on the working section by smoke method or silk thread method. The detection position includes the periphery and middle area of the working window; the wind speed of the intake flow is measured by an anemometer on the section wind speed of the working window.
2. Detecting the wind speed and uniformity of the sinking airflow: use an anemometer to measure the wind speed of the cross section evenly.
3. Cleanliness detection of working area: adopt dust particle timer to detect in the working area.
4. Noise detection: The horizontal center of the front panel of the biological safety cabinet is 300mm outwards and 380mm above the work surface to measure the noise with the sound level.
5. Illumination detection: set a measuring point every 30cm along the center line of the length of the worktable.
6. Leakage detection of the cabinet: Seal the safety cabinet and pressurize it to 500Pa. After 30 minutes, connect a pressure gauge or pressure sensor system in the test area to detect with the pressure decay method, or use the soap bubble method to detect







