1. Push the supplies to the bedside of the patient and carry the treatment card, check the bed number and name, evaluate the patient's physical condition and explain the purpose and method, ask the patient's needs and assist in solving it.
2. Fix the infusion pump vertically on the infusion stand, turn on the power of the infusion pump, turn on the power switch, hang the liquid on the infusion stand, check again, exhaust, and close the regulator.
3. Turn on the power switch of the infusion pump, and correctly install the lower part of the infusion tube of the Murphy dropper in the infusion pump into the slot of the infusion pump.
4. Evaluate the skin and blood vessels at the injection site, and disinfect the hands.
5. Establish an intravenous infusion channel according to the procedure of intravenous infusion.
6. Set the infusion volume, infusion speed and other required parameters according to the will.
7. Check the treatment card again to check whether the infusion set pipeline is unblocked.
8. Turn on the pumping switch and pump in at the set speed.
9. Check again, fill in the infusion inspection card and hang it on the infusion stand.
10. Observe the infusion situation, explain the precautions to the patient, organize the patient's bed unit, and place the caller within the patient's reach.
11. Put the disposable items into the yellow garbage bag for final treatment, standardize hand washing and record.
