Medical Equipment Maintenance - Maintenance of C-arm X-ray Machines
With the continuous development of medical imaging technology, it is more common for grass-roots hospitals to use domestic C-arm X-ray machines in surgery, especially in orthopedic surgery. Doctor's welcome. Especially in spinal surgery, it has been widely used, which greatly improves the quality of surgery and shortens the operation time.
Advanced medical equipment is a necessary condition for the hospital to carry out medical treatment and scientific research, and it is also the basis for improving the medical quality of the hospital. With the upgrading of medical imaging equipment and the rapid development of technology, how to effectively use and maintain medical imaging equipment is particularly important. Efficient equipment maintenance management is also an important measure that cannot be ignored for hospitals to pursue efficiency and reduce costs, and is the premise to improve the economic benefits of the entire hospital. For the radiology department, in addition to updating the relevant equipment in a timely manner with the pace of the times, it is also necessary to pay more attention to the good maintenance and maintenance of the existing equipment.
The following is a detailed explanation of the use and maintenance of the C-arm X-ray machine, which can prolong the use time.
Instructions
1. Release the foot brake, push the machine to the operating table, and adjust the operating table. The monitor is placed in a position facing the operator for easy viewing.
2. Connect the high-voltage cable between the operator and the monitor, and turn on the power.
3. Turn on the power switch on the control panel of the operator, and perform self-test.
4. Release the brake switch on the C-arm, adjust the C-arm so that the tube and receiver are aligned with the shooting position, and then lock the brake switch.
5. Select the fluoroscopy or filming function on the control panel of the operator, and select the manual program or the automatic program to adjust the energy size.
6. The staff should wear protective equipment, prepare for protection, and choose a manual switch or a foot switch for discharging and filming.
7. If you want to print a picture, first select the picture you want to print on the display screen, and tap the print switch.
8. After the operation is completed, turn off the power switch on the control panel, unplug the power socket, and arrange the circuit.
9. Take the operating machine out of the field of view, and separate the high-voltage cable of the operating machine and the display. Put the unit back and lock all brake switches.
maintainance
1. Regularly inspect the C-arm to ensure its use.
2. Be careful not to collide when moving the C-arm.
3. The C-arm support rod must be lowered to the lowest position after each use.
4. Push the C-arm back to its original position and lock the casters after use.
Effective preventive maintenance of medical equipment should be implemented in daily work. Otherwise, repairing it when it is damaged will not only cost time and money, but also delay the patient's examination and condition, and even cause doctor-patient disputes or medical lawsuits. So everyone must pay attention to the repair and maintenance of medical equipment!
